How to Clean the Drain Pump Filter on a Samsung WF50BG8300AA Washer — Step-by-Step Instructions
Step-by-step instructions for the Samsung WF50BG8300AA (front-load washer, 5.0 cu ft, bespoke ai). Parts and access points can differ slightly by production year — the steps below cover the common layout for this platform, and the model notes flag its quirks.
Unplug the washer first. The trap may hold a surprising amount of water — go slow with the cap and let it drain into the pan in stages.
Tools
- Shallow pan or baking dish
- Towels
- Flashlight
Parts
- None — this is maintenance
Step by step
-
1 Find the access door
On nearly every front-loader there’s a small rectangular door or kick-panel at the bottom front corner. Pop it open with a flat screwdriver or coin.
-
2 Drain the water first
Most machines hide a small rubber drain hose next to the filter cap. Pull it out, aim it into your shallow pan, and remove its plug. No hose? Unscrew the filter cap a quarter-turn and let water seep out in stages.
-
3 Unscrew the filter
Turn the cap counterclockwise and pull the coin trap straight out. Expect gunk: lint mats, coins, hair pins, guitar picks, and at least one sock over the machine’s lifetime.
-
4 Clean everything
Rinse the filter under hot water, scrub with an old toothbrush, and shine a flashlight into the pump housing — spin the impeller with a finger to make sure nothing is jammed behind it.
-
5 Reinstall and test
Screw the filter back in snugly (crooked threads leak), replug the drain hose, close the door, and run a short cycle to confirm draining and no drips.
Samsung WF50BG8300AA notes & error codes
The best advice for any front-loader owner is to leave the door ajar between washes. Nearly every mouldy boot and smelly machine traces back to a door kept shut on a damp drum.
| Code | What it means |
|---|---|
| 5E | Not draining |
| 4C | Water supply fault |
| dC | Door not closed |
| UB | Unbalanced load |
| 3C | Motor or hall sensor fault |
Full details for this machine — common problems, causes, and costs — are in the Samsung WF50BG8300AA repair guide. The general version of these instructions is here.
If the filter is clean but the washer still won’t drain — or the pump hums or grinds with the filter out — the pump itself is likely failing, and diagnosing pumps vs control faults is quick work for a tech. If you'd rather skip it entirely, find a washer repair pro near you →
What this repair costs professionally
Find a washer repair pro near you.
Browse verified independent appliance repair companies by city — ratings, hours, and phone numbers, no middleman.