How to Fix Dishes Not Drying on a Bosch SHEM63W55N (300 Series) Dishwasher, Step by Step Instructions
Step by step instructions for the Bosch SHEM63W55N (300 Series) (dishwasher, condensation dry). Parts and access points can differ a little by production year. The steps below cover the common layout for this platform, and the model notes flag its quirks.
You can fix a dishwasher not drying dishes on a Bosch SHEM63W55N (300 Series) yourself in 15 to 45 minutes. Difficulty is easy. A pro charges a $120+ service call.
- 5 steps, 15 to 45 minutes, easy difficulty.
- Tools you need are multimeter (only if testing the element).
- Parts to buy are rinse aid ($5 to $8). Heating element only if it tests dead.
- Unplug the machine before you start.
If you test the heating element, kill the breaker first.
Tools
- Multimeter (only if testing the element)
Parts
- Rinse aid ($5 to $8). Heating element only if it tests dead
Step by step
-
1 Fill the rinse aid and set it high
The unglamorous fix that works. Fill the dispenser, set its dosage to maximum, and give it two weeks of loads. Rinse aid is how modern dishwashers dry.
-
2 Use the heat/extra dry option
Eco and quick cycles skip heated dry on many machines. Turn on the heated dry, extra dry, or sanitize option and compare.
-
3 Open the door at cycle end
Condensation dry machines (Bosch style, no exposed element) benefit hugely from cracking the door when the cycle ends, some do it automatically.
-
4 Check the heating element (exposed element machines)
If dishes AND the tub interior are cold at cycle end, breaker off, then continuity test the element at its terminals under the tub, open circuit means replace it.
-
5 Load for drainage
Cups angled, plastics up top, nothing nested. Water pooled in mug bottoms isn’t a machine fault, it’s geometry.
Bosch SHEM63W55N (300 Series) notes & error codes
E15 tip. Water in the base pan tips the machine into permanent drain mode. Tilting the unit 45° forward to drain the pan often restores it, then find WHY it leaked. And E24 after a new install is usually a missing high loop in the drain hose.
| Code | What it means |
|---|---|
| E24 / E25 | Drain fault, filter, pump cover, or hose |
| E15 | AquaStop leak protection tripped |
| E09 | Heating fault |
| E01 / E02 | Board faults |
Full details for this machine, common problems, causes, and costs, are in the Bosch SHEM63W55N (300 Series) repair guide. The general version of these instructions is here.
A dead heating element or a stuck vent fan is a modest repair, worth a pro visit if under tub electrical work isn’t your idea of a weekend. If you'd rather skip it entirely, find a dishwasher repair pro near you
What this repair costs professionally
Find a dishwasher repair pro near you.
Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.