How to Replace the Shift Actuator on a Kenmore 26132 Washer — Step-by-Step Instructions
Step-by-step instructions for the Kenmore 26132 (top-load washer (whirlpool vmw)). Parts and access points can differ slightly by production year — the steps below cover the common layout for this platform, and the model notes flag its quirks.
Unplug the washer and shut the taps. You’ll tilt the machine back — have a helper steady it or lean it securely against a wall. Never work under an unsupported washer.
Tools
- 1/4" socket set
- Work gloves
- A helper or wall to lean the washer against
Parts
- Shift actuator for your model (VMW-platform Whirlpool/Maytag/Kenmore/Amana)
Step by step
-
1 Confirm the symptom
Won’t spin, stops after wash, or F7E1/F7E5 codes on a modern top-loader = actuator until proven otherwise. It’s the #1 failure on this platform.
-
2 Tilt the washer back
Empty it, unplug, disconnect hoses if needed, and lean the machine back about 45° against a wall — the actuator is on the underside of the gearcase, visible from the front underside.
-
3 Remove the old actuator
Two 1/4" screws and one wiring plug. Note how the shift lever sits before pulling it out.
-
4 Seat the new one
Slide the new actuator so its fork engages the shift slider, snug the screws, and click the plug home. If it won’t seat flush, the splutch cam underneath may be mispositioned — rotate the basket slightly and retry.
-
5 Stand it up and calibrate
Reconnect everything and run the calibration/diagnostic cycle for your model (for most VMW machines: a specific knob sequence — check your tech sheet inside the console or base). Then run a rinse & spin to confirm.
Kenmore 26132 notes & error codes
110.26132 crosses to Whirlpool part numbers at any counter — Sears being gone changes nothing.
| Code | What it means |
|---|---|
| F7 E1/E5 | Actuator |
| F5-series | Lid lock |
| F9 E1 | Drain |
Full details for this machine — common problems, causes, and costs — are in the Kenmore 26132 repair guide. The general version of these instructions is here.
If a new actuator throws the same codes, the splutch or the board is next in line — a pro can bench-test all three in one visit instead of you buying parts one at a time. If you'd rather skip it entirely, find a washer repair pro near you →
What this repair costs professionally
Find a washer repair pro near you.
Browse verified independent appliance repair companies by city — ratings, hours, and phone numbers, no middleman.