How to Replace the Drive Belt on a LG WT7300CW Washer — Step-by-Step Instructions
Step-by-step instructions for the LG WT7300CW (top-load washer, direct drive). Parts and access points can differ slightly by production year — the steps below cover the common layout for this platform, and the model notes flag its quirks.
Unplug the washer and shut the taps. Tilting a washer needs a helper or a wall — never crawl under an unsupported machine.
Tools
- Socket set
- Work gloves
- A helper to tilt the machine
Parts
- Drive belt for your exact model — belt profiles are not interchangeable
Step by step
-
1 Find the belt
On most modern top-loaders the belt is under the machine (tilt it back); on belt-drive front-loaders it’s behind the rear panel. You’ll see the big drum pulley and the small motor pulley.
-
2 Inspect before replacing
A glazed, cracked, or stretched belt confirms the diagnosis. While you’re looking, spin the drum pulley by hand — grinding here means bearing trouble, a different (bigger) job.
-
3 Walk the old belt off
Rotate the pulley while guiding the belt off its edge, like removing a bicycle chain. Note the ribbed side faces the pulleys.
-
4 Walk the new belt on
Loop it around the motor pulley first, start it on the drum pulley’s edge, and rotate the pulley while feeding it on. It should sit snug and centered in the grooves.
-
5 Spin and test
Rotate two full revolutions by hand to confirm tracking, stand the machine up, and run a spin cycle.
LG WT7300CW notes & error codes
If it shakes violently with every mixed load after a few years, price the suspension rod kit before assuming worse — it’s the signature wear item on large LG top-loaders.
| Code | What it means |
|---|---|
| UE | Unbalance — suspension or load |
| OE | Drain fault |
| IE | Fill fault |
| LE | Motor position sensor |
| PE | Pressure (water level) sensor |
| dE | Lid lock fault |
Full details for this machine — common problems, causes, and costs — are in the LG WT7300CW repair guide. The general version of these instructions is here.
If the new belt squeals or throws itself off, the pulley alignment or a seizing transmission is at fault — stop before you burn through a second belt and have a pro check the drivetrain. If you'd rather skip it entirely, find a washer repair pro near you →
What this repair costs professionally
Find a washer repair pro near you.
Browse verified independent appliance repair companies by city — ratings, hours, and phone numbers, no middleman.