Whirlpool WDTA80SAKZ Repair Guide
An upper-tier Whirlpool built-in with a third rack and fingerprint-resistant finish. Conventional and straightforward to service, with the drain path and wash pump accounting for most calls.
Common problems & typical repair costs
| Problem | Likely cause | Typical fix | OEM part # | Typical cost |
|---|---|---|---|---|
| Water left in the bottom | Drain pump blocked or check valve jammed | Clear the drain path; replace pump if dead | — | $150–$310 |
| Dishes gritty | Filter clogged or wash pump weakening | Clean filter; replace pump if spray pressure is low | — | $0–$350 |
| Not filling | Inlet valve scaled shut | Replace the water inlet valve | — | $130–$290 |
| Will not start, lights flashing | Door latch switch or control fault | Replace latch; diagnose control | — | $140–$340 |
| Leaking from under the door | Door gasket worn or misaligned | Replace door gasket | — | $130–$300 |
Costs are national averages for professional repair (parts + labor). See the linked cost guides below for full breakdowns.
Error codes
| Code | What it means |
|---|---|
| F8 E4 | Flood or overfill condition |
| F9 E1 | Drain fault |
| F7 E1 | Heating fault |
| F6 E4 | Water inlet fault |
| Clean light flashing | Stored fault — run diagnostics to read |
Tech notes
A flashing Clean light reports a stored fault rather than blinking at random. Running the diagnostic cycle reads the real code and saves guesswork on a vague "acting up" complaint.
Cost guides for this machine’s common repairs
DIY step-by-step instructions for this model
Find a dishwasher repair pro near you.
Browse verified independent appliance repair companies by city — ratings, hours, and phone numbers, no middleman.
We'll buy your Whirlpool WDTA80SAKZ — or haul it away.
If the repair costs more than this machine is worth to you, we'll quote you on taking it. Cash offer if it still has value, free or paid scrap pickup if it doesn't. We'll tell you honestly which it is.