Arizona Appliance Repairs Call (520) 412-6871
Menu
Call (520) 412-6871

Whirlpool WGD4950HW is a gas dryer, 7.0 cu ft dryer sold 2019 to present. Its most common repair is heats briefly then blows cold, usually $150 to $315.

At a glance
  • 5 common problems with causes, fixes and costs below.
  • 4 error codes decoded.
  • A dryer like this lasts about 12 to 18 years.
  • OEM part numbers listed and checked against two suppliers.
Gas dryer, 7.0 cu ft illustration
Gas dryer, 7.0 cu ft
⏳ LIFETIME REPAIR COST, Whirlpool WGD4950HW
Expected lifespan12 to 18 years
Repairs over its life2 to 3 typical
Lifetime repair spend$450 to $650
Averages out to~$35/year

Common problems & typical repair costs

ProblemLikely causeTypical fixOEM part #Typical cost
Heats briefly then blows cold Gas valve solenoid coils failing when hot Replace the valve coil kit not listed $150 to $315
Igniter glows but burner never lights Weak igniter or failed coils Replace igniter and/or coils as measured not listed $150 to $325
No heat at all Thermal fuse open from restricted airflow Replace fuse and thermostat. Clear the vent WP3392519replaces 3392519, 3388651, 694511, 80005⚠ A thermal fuse never fails without a reason, find and clear the airflow restriction that opened it, or it will blow again $130 to $285
Long drying times Vent duct restricted Full vent cleanout not listed $100 to $220
Thumping or squealing Rollers, idler or belt worn Fit the maintenance kit not listed $150 to $305

Costs are national averages for professional repair (parts + labor). See the linked cost guides below for full breakdowns.

⚙️ About these part numbers. These are the OEM part numbers for the Whirlpool WGD4950HW at the time of writing. Manufacturers supersede part numbers over time, and some parts split by serial number range, the same model built two years apart can take a different pump. Always check the number against the full model and serial number on your machine’s tag before you order, and buy from a supplier who accepts returns on the wrong part. Not sure? A local appliance repair pro will confirm the right part in a two minute phone call, and often has it on the van.

Error codes

CodeWhat it means
F0 E1 Airflow restriction
F3 E1 Moisture sensor fault
F3 E4 Thermistor fault
PF Power failure

Tech notes

Heat that works for a few minutes then quits, worsening as the machine warms, is the classic heat soak failure of gas valve coils. Watch the burner. Glow, ignition, then flame out after a few cycles.

Sources

Where the safety, regulatory and warranty claims on this page come from. Repair costs are our own figures based on Arizona market rates and OEM parts pricing.

Cost guides for this machine’s common repairs

DIY step by step instructions for this model

DON’T WANT TO DIY IT?

Find a dryer repair pro near you.

Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.

♻️ NOT WORTH FIXING?

We'll buy your Whirlpool WGD4950HW, or haul it away.

If the repair costs more than this machine is worth to you, we'll quote you on taking it. Cash offer if it still has value, free or paid scrap pickup if it doesn't. We'll tell you honestly which it is.

Quote My Dryer Free · No obligation · Arizona only

More Whirlpool guides