How to Replace the Blower Wheel on a GE GTD58EBSVWS Dryer, Step by Step Instructions
Step by step instructions for the GE GTD58EBSVWS (electric dryer, 7.4 cu ft, aluminized drum). Parts and access points can differ a little by production year. The steps below cover the common layout for this platform, and the model notes flag its quirks.
You can replace a dryer blower wheel on a GE GTD58EBSVWS yourself in 1 to 1.5 hours. Difficulty is moderate. A pro charges $120 to $250.
- 5 steps, 1 to 1.5 hours, moderate difficulty.
- Tools you need are nut driver, channel lock pliers, shop vac.
- Parts to buy are blower wheel (and clamp/retainer) for your model.
- Unplug the machine before you start.
Unplug the dryer. Some wheels thread onto the motor shaft with a LEFT hand thread, check your model’s service sheet before muscling it the wrong way.
Tools
- Nut driver
- Channel lock pliers
- Shop vac
Parts
- Blower wheel (and clamp/retainer) for your model
Step by step
-
1 Confirm the wheel
Roaring or rattling from the blower housing, weak exhaust with a clean vent, or visible wobble when you reach in and wiggle the wheel (unplugged!) confirms it.
-
2 Open the blower housing
Usually behind the lower front panel or accessible after removing the drum. The housing cover comes off with a ring of screws.
-
3 Hold the shaft, free the wheel
Grip the motor shaft flats with pliers and turn the wheel per its thread direction (often clockwise to loosen, left hand thread), or release the clamp on clamp style hubs.
-
4 Vacuum the housing
The lint mat you find behind the wheel is why airflow died. Clean the housing and the duct stub thoroughly.
-
5 Fit the new wheel and test
Thread or clamp the new wheel on snug, spin it by hand for clearance, reassemble, and feel for strong airflow at the exhaust.
GE GTD58EBSVWS notes & error codes
A squeal that rises and falls with drum rotation is the idler pulley. A continuous whine that does not track the drum is usually the blower or motor. That one distinction saves a lot of guessing on a noise call.
| Code | What it means |
|---|---|
| E1 | Temperature sensing fault |
| E3 | Door circuit fault |
| E6 | Motor fault |
Full details for this machine, common problems, causes, and costs, are in the GE GTD58EBSVWS repair guide. The general version of these instructions is here.
If the shaft is rusted into the old hub, penetrating oil and patience sometimes lose to reality, a pro can pull the motor and press the wheel off without collateral damage. If you'd rather skip it entirely, find a dryer repair pro near you
What this repair costs professionally
Sources
Where the safety, regulatory and warranty claims on this page come from. Repair costs are our own figures based on Arizona market rates and OEM parts pricing.
- Home Fires Involving Clothes Dryers and Washing Machines National Fire Protection Association Dryer fire incidence, and failure to clean as the leading contributing factor.
Find a dryer repair pro near you.
Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.