How to Replace a Dryer Door Switch, Step by Step Instructions
You can replace a dryer door switch yourself in 20 to 40 minutes. Difficulty is easy. A pro charges $80 to $180.
- 4 steps, 20 to 40 minutes, easy difficulty.
- Tools you need are putty knife, screwdriver.
- Parts to buy are door switch for your model.
- Unplug the machine before you start.
Unplug the dryer before opening the cabinet.
Tools
- Putty knife
- Screwdriver
Parts
- Door switch for your model
Step by step
-
1 Confirm the symptom
No hum, no light change when pressing start, and no click when you press the little plunger by the door opening. That silence is the diagnosis.
-
2 Release the top panel
Slide a putty knife under the front corners of the dryer top to pop the clips and hinge it up.
-
3 Swap the switch
The switch clips or screws into the door frame from underneath. Unplug its connector, transfer wires to the new switch, and snap it in.
-
4 Test before closing
Plug in briefly with the top still up (fingers clear), close the door, and press start, a working switch means the motor spins.
If the switch clicks fine but the dryer stays dead, the thermal fuse or start switch is next, both cheap, but a meter finds the right one first try. If you'd rather skip it entirely, find a dryer repair pro near you
Step by step instructions for your exact model
The same repair, tailored with your machine's error codes, known quirks, and typical costs.
What this repair costs professionally
Find a dryer repair pro near you.
Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.