Arizona Appliance Repairs Call (520) 412-6871
Menu
Call (520) 412-6871

You can replace dryer drum rollers & idler pulley on a LG DLE3400W yourself in 1 to 1.5 hours. Difficulty is moderate. A pro charges $120 to $250.

At a glance
  • 5 steps, 1 to 1.5 hours, moderate difficulty.
  • Tools you need are putty knife, nut driver, pliers for the triangular clips.
  • Parts to buy are maintenance kit. Rollers + idler pulley + belt (do all three together).
  • Unplug the machine before you start.
MachineLG DLE3400W
DifficultyModerate
Time1 to 1.5 hours
What you saveMaintenance kit $20 to $50 DIY vs $120 to $250 professionally
⚠️ BEFORE YOU START

Unplug the dryer. Some roller shafts have sharp burrs, gloves help.

Tools

  • Putty knife
  • Nut driver
  • Pliers for the triangular clips

Parts

  • Maintenance kit. Rollers + idler pulley + belt (do all three together)

Step by step

  1. 1 Open up and pull the drum

    Same teardown as a belt job. Top up, front off, belt tension released, drum out. (See the belt guide for detail, you’re replacing that too, since it’s off anyway.)

  2. 2 Spin every wheel

    Rollers should spin freely and silently with no flat spots. The idler should spin without squealing. Front glides (if fitted) shouldn’t be worn to metal.

  3. 3 Swap the rollers

    Pry off the triangular retaining clips (they love to fly, cup a hand over them), slide off old rollers, slide on new, new clips from the kit.

  4. 4 Swap the idler

    The idler arm usually lifts out of a slot. Transfer the new pulley or replace the whole arm per your kit.

  5. 5 New belt, drum back in, test

    Route the new belt, reassemble, and enjoy a dryer that sounds five years younger.

LG DLE3400W notes & error codes

The Flow Sense duct test is genuinely useful, take D codes seriously before they become a blown thermal cutoff. nP after a storm is usually the breaker, not the dryer.

CodeWhat it means
D80 / D90 / D95 Duct blocked 80/90/95%, clean vent now
tE1 / tE2 Thermistor faults
nP No power on one 240V leg, check breaker
CL Child lock on (not a fault)

Full details for this machine, common problems, causes, and costs, are in the LG DLE3400W repair guide. The general version of these instructions is here.

🔧 WHEN TO CALL A PRO

Grinding from the very back center after new rollers points at the rear drum bearing, some models make that a genuinely miserable job and a fair thing to hand to a pro. If you'd rather skip it entirely, find a dryer repair pro near you

What this repair costs professionally

DON’T WANT TO DIY IT?

Find a dryer repair pro near you.

Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.