How to Replace the Oven Igniter on a Whirlpool WFE535S0JZ Oven & Range — Step-by-Step Instructions
Step-by-step instructions for the Whirlpool WFE535S0JZ (electric range, 5.3 cu ft, frozen bake). Parts and access points can differ slightly by production year — the steps below cover the common layout for this platform, and the model notes flag its quirks.
This is a GAS appliance repair. Unplug the range AND close its gas shutoff valve before starting. Never touch the new igniter’s grey element with bare fingers — skin oils shorten its life. If any step feels unclear, this is a very reasonable repair to hand to a pro.
Tools
- Nut driver
- Small socket set
- Wire connectors (usually included with part)
Parts
- Igniter for your model — round or flat style, they are not interchangeable
Step by step
-
1 Cut power and gas
Unplug the range and turn the gas shutoff (behind the range or in the cabinet) perpendicular to the pipe. Confirm the cooktop won’t light.
-
2 Expose the burner tube
Remove the oven racks and the flat floor panel (a few screws) — the burner tube and its glow-bar igniter sit beneath.
-
3 Unbolt the old igniter
Two small screws hold it to the burner bracket. Follow its wires to the connector block or splice point.
🔧 Hand-off point: If your model’s wiring is spliced (no connector plug), you’ll be cutting wires and joining with ceramic wire nuts — a fine job for confident hands, a fair hand-off point otherwise. find a oven & range repair pro near you → -
4 Connect the new igniter
Plug or splice per the part’s instructions, handling the element only by its ceramic base. Mount it in the identical bracket position beside the burner tube.
-
5 Restore and test
Reassemble the floor panel, open the gas valve, plug in, and set a bake: glow within 30 seconds, flame within about 60. Watch the first full ignition with the door open.
Whirlpool WFE535S0JZ notes & error codes
Measure the sensor at room temperature on any F3 code — about 1,080 ohms is the target. A sensor reading correctly points at the harness or control instead, which saves ordering the wrong part.
| Code | What it means |
|---|---|
| F2E1 | Runaway oven temperature |
| F3E0 | Oven temperature sensor open |
| F3E1 | Oven sensor shorted |
| F5E1 | Door lock switch fault |
| F9E0 | Door latch cannot reach unlocked position |
Full details for this machine — common problems, causes, and costs — are in the Whirlpool WFE535S0JZ repair guide. The general version of these instructions is here.
Any hint of gas smell after the repair, an igniter that glows without flame, or splice wiring you don’t love — stop and get a pro. Gas margin-of-error is not like other appliances. If you'd rather skip it entirely, find a oven & range repair pro near you →
What this repair costs professionally
Sources
Where the safety, regulatory and warranty claims on this page come from. Repair costs are our own figures based on Arizona market rates and OEM parts pricing.
- Carbon Monoxide Safety Guide U.S. Consumer Product Safety Commission Carbon monoxide risk from gas cooking and heating appliances.
Find a oven & range repair pro near you.
Browse verified independent appliance repair companies by city — ratings, hours, and phone numbers, no middleman.