Samsung NX60T8511SS Repair Guide
A 6.0 cu ft slide in gas range with front controls, convection and an air fry mode. The front control layout looks excellent and cooks well, and it introduces the fault this design is known for. The control knobs and their bezels sit directly above the oven vent, and they take heat every time the oven runs.
Samsung NX60T8511SS is a gas slide in range, convection, air fry oven & range sold 2020 to present. Its most common repair is oven slow to light or will not light, usually $170 to $350.
- 5 common problems with causes, fixes and costs below.
- 5 error codes decoded.
- An oven & range like this lasts about 15 to 20 years.
- Check the model and serial tag before you order any part.
Common problems & typical repair costs
| Problem | Likely cause | Typical fix | OEM part # | Typical cost |
|---|---|---|---|---|
| Oven slow to light or will not light | Oven igniter weakening | Replace oven igniter | not listed | $170 to $350 |
| Knobs or the bezel behind them discoloured, warped or cracked | Heat from the oven vent on a front control design | Replace knobs and bezel. Verify vent is not obstructed | not listed | $120 to $320 |
| Convection uneven or fan noisy | Convection fan motor bearing wear | Replace convection fan motor | not listed | $220 to $450 |
| Display errors or unresponsive controls | Main control board or touch panel fault | Replace control board or panel as diagnosed | not listed | $280 to $550 |
| Surface burner clicking continuously | Moisture or debris around the spark electrode | Dry and clean the electrode. Replace igniter switch if it persists | not listed | $130 to $300 |
Costs are national averages for professional repair (parts + labor). See the linked cost guides below for full breakdowns.
Error codes
| Code | What it means |
|---|---|
| C-F0 | Communication error between the control and the touch panel |
| C d0 | Door lock switch fault |
| C-F2 | Touch panel key stuck |
| E-08 | Oven temperature sensor fault |
| C-20 | Oven temperature sensor out of range |
Tech notes
Tell customers with front control ranges not to leave knobs installed during long self clean or high temperature cycles if the manual allows removing them, and to keep the vent clear of foil or trays. The knob damage is heat exposure, not a defect in the knob.
Sources
Where the safety, regulatory and warranty claims on this page come from. Repair costs are our own figures based on Arizona market rates and OEM parts pricing.
- Carbon Monoxide Safety Guide U.S. Consumer Product Safety Commission Carbon monoxide risk from gas cooking and heating appliances.
Cost guides for this machine’s common repairs
DIY step by step instructions for this model
Find a oven & range repair pro near you.
Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.
We'll buy your Samsung NX60T8511SS, or haul it away.
If the repair costs more than this machine is worth to you, we'll quote you on taking it. Cash offer if it still has value, free or paid scrap pickup if it doesn't. We'll tell you honestly which it is.