How to Fix a Burner That Won’t Light on a Frigidaire FFGF3054TS Oven & Range — Step-by-Step Instructions
Step-by-step instructions for the Frigidaire FFGF3054TS (gas range, sealed burners). Parts and access points can differ slightly by production year — the steps below cover the common layout for this platform, and the model notes flag its quirks.
Burners off and cold before cleaning. If you ever smell gas without a flame, stop, ventilate, and shut the range’s gas valve.
Tools
- Soft brush or old toothbrush
- Sewing needle or paperclip
- Towel
Parts
- None for the cleaning fix; spark electrode if cleaning fails
Step by step
-
1 Strip and wash the burner
Remove the grate, burner cap, and burner head. Wash the cap and head in soapy water, scrubbing the flame ports.
-
2 Clear each port
Push a needle or straightened paperclip through every clogged port — boil-over residue plugs them invisibly. Don’t use a toothpick; wood breaks off inside.
-
3 Clean the igniter electrode
The little white ceramic post next to the burner: brush it clean and dry. Grease film on the electrode kills the spark.
-
4 Dry and reassemble exactly
Everything bone-dry, then reseat the burner head and cap in their keyed positions — a crooked cap causes half-lit, yellow flames.
-
5 Test
It should click and light within 2–4 seconds with an even blue ring. Clicking with no spark at only this burner = replace that electrode; no clicking anywhere = spark module.
Frigidaire FFGF3054TS notes & error codes
F10 on a Frigidaire is not automatically a control board. Check the sensor probe and its harness first — a probe reading low tells the board the oven is cold, so the board keeps heating, and the runaway code is the symptom rather than the fault.
| Code | What it means |
|---|---|
| F10 | Runaway oven temperature |
| F11 | Shorted key on the touch pad |
| F30 | Oven sensor probe circuit open |
| F31 | Oven sensor probe circuit shorted |
| F90 | Door lock motor fault |
Full details for this machine — common problems, causes, and costs — are in the Frigidaire FFGF3054TS repair guide. The general version of these instructions is here.
A burner that lights but burns yellow after a thorough clean, or a dead spark module, deserves a pro — yellow flames can produce carbon monoxide and modules involve range disassembly. If you'd rather skip it entirely, find a oven & range repair pro near you →
What this repair costs professionally
Sources
Where the safety, regulatory and warranty claims on this page come from. Repair costs are our own figures based on Arizona market rates and OEM parts pricing.
- Carbon Monoxide Safety Guide U.S. Consumer Product Safety Commission Carbon monoxide risk from gas cooking and heating appliances.
Find a oven & range repair pro near you.
Browse verified independent appliance repair companies by city — ratings, hours, and phone numbers, no middleman.