Arizona Appliance Repairs Call (520) 412-6871
Menu
Call (520) 412-6871

You can replace the light bulb in a microwave on a KitchenAid KMHC319ESS yourself in 10 to 25 minutes. Difficulty is easy. A pro charges $70 to $180.

At a glance
  • 6 steps, 10 to 25 minutes, easy difficulty.
  • Tools you need are screwdriver, step stool, gloves or a cloth.
  • Parts to buy are appliance rated bulb matching the manual’s type and wattage $5 to $30.
  • Unplug the machine before you start.
MachineKitchenAid KMHC319ESS
DifficultyEasy
Time10 to 25 minutes
What you saveBulb $5 to $30 DIY vs $70 to $180 professionally
⚠️ BEFORE YOU START

Unplug the microwave first, the bulb circuit is live even when the microwave is idle. Never remove the outer metal cabinet of a microwave. The high voltage capacitor inside stores a charge that can kill you, and it holds that charge after the unit is unplugged. Every step in this guide stays outside the cabinet or inside the cooking cavity, if a repair needs the case off, it is a job for a technician. Only attempt the bulb if it is reachable from outside the cabinet. On many models the cooktop light is, and the cavity light is not.

Tools

  • Screwdriver
  • Step stool
  • Gloves or a cloth

Parts

  • Appliance rated bulb matching the manual’s type and wattage $5 to $30

Step by step

  1. 1 Buy the right bulb before you start

    Check the manual or the label for the type and wattage. Appliance bulbs are built for heat and vibration. A standard household bulb in a microwave fails within weeks, and an over wattage bulb can damage the housing.

  2. 2 Unplug the microwave

    Never change a bulb on a live appliance. On an over the range unit the outlet is in the cabinet above.

  3. 3 Find the access cover

    On most over the range microwaves the cooktop light sits behind a small lens or plate on the underside, held by one or two screws. If your model’s bulb is only reachable by removing the outer cabinet, stop here and book a technician instead.

  4. 4 Remove the cover and the old bulb

    Undo the screws and lower the lens. Use a cloth or gloves, bulb glass is fragile and there may be sharp edges if it has shattered.

  5. 5 Fit the new bulb

    Handle it with a cloth rather than bare fingers, particularly on halogen types where skin oils shorten bulb life. Screw or push it in until it seats, without forcing.

  6. 6 Refit the cover and test

    Replace the lens and screws, plug the unit back in, and switch the light on. If it does not light with a known good bulb, the socket or the control is at fault.

KitchenAid KMHC319ESS notes & error codes

Always establish which function failed before quoting on a convection microwave. "It does not heat" can mean the magnetron or the convection element, they are entirely separate systems, and there can be a $250 difference between the two answers.

CodeWhat it means
F2E1 Shorted keypad
F3E0 Temperature sensor fault (convection)
F6E1 Control communication fault
Open/Close Door Door sensing fault

Full details for this machine, common problems, causes, and costs, are in the KitchenAid KMHC319ESS repair guide. The general version of these instructions is here.

🔧 WHEN TO CALL A PRO

If a new, correct bulb does not light, the socket has probably corroded or the light circuit through the control board has failed. On over the range units the cooktop socket lives in steam and grease for years, and replacing it is inside the cabinet work. If you'd rather skip it entirely, find a microwave repair pro near you

What this repair costs professionally

Sources

Where the safety, regulatory and warranty claims on this page come from. Repair costs are our own figures based on Arizona market rates and OEM parts pricing.

DON’T WANT TO DIY IT?

Find a microwave repair pro near you.

Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.