GE GDT550PYRFS Repair Guide
A mid-range GE built-in with Dry Boost and a bottle wash jet system. Widely installed in new builds and a frequent visitor on service calls.
Common problems & typical repair costs
| Problem | Likely cause | Typical fix | OEM part # | Typical cost |
|---|---|---|---|---|
| Standing water after the cycle | Drain pump or blocked high loop | Clear the drain path; replace pump | — | $150–$320 |
| Dishes wet at the end | Rinse aid empty or Dry Boost not selected | Refill rinse aid; verify settings before any repair | — | $0–$250 |
| Poor wash results | Filter clogged or spray arm jets blocked | Clean filter and arms | — | $0–$180 |
| Will not fill | Inlet valve failure or scaled screen | Clean screen; replace valve | — | $130–$300 |
| Control panel unresponsive | Touch panel or board failure | Replace panel or control board | — | $180–$400 |
Costs are national averages for professional repair (parts + labor). See the linked cost guides below for full breakdowns.
Error codes
| Code | What it means |
|---|---|
| Flashing lights | GE reports faults by blink pattern |
| LEAK | Leak detection activated |
| H2O | Fill fault |
Tech notes
Rinse aid is not optional on modern dishwashers and an empty dispenser is behind a huge share of "not drying" calls. Check it before quoting anything — it is free and resolves the complaint more often than any part.
Cost guides for this machine’s common repairs
DIY step-by-step instructions for this model
Find a dishwasher repair pro near you.
Browse verified independent appliance repair companies by city — ratings, hours, and phone numbers, no middleman.
We'll buy your GE GDT550PYRFS — or haul it away.
If the repair costs more than this machine is worth to you, we'll quote you on taking it. Cash offer if it still has value, free or paid scrap pickup if it doesn't. We'll tell you honestly which it is.