GE Profile PHS930YPFS Repair Guide
A 30-inch induction slide in with convection and air fry, the top of GE’s mainstream range line. Induction changes the service picture entirely. There are no surface elements to burn out, but there are induction coils, a generator board and cooling fans, and cooktop faults are board level work rather than parts swapping.
GE Profile PHS930YPFS is an induction slide in range, convection, air fry oven & range sold 2020 to present. Its most common repair is one cooking zone dead while others work, usually $350 to $750.
- 5 common problems with causes, fixes and costs below.
- 5 error codes decoded.
- An oven & range like this lasts about 15 to 20 years.
- Check the model and serial tag before you order any part.
Common problems & typical repair costs
| Problem | Likely cause | Typical fix | OEM part # | Typical cost |
|---|---|---|---|---|
| One cooking zone dead while others work | Induction coil or its section of the generator board | Replace the coil or generator board for that zone | not listed | $350 to $750 |
| Cooktop shuts off mid cook and restarts later | Cooling fan failure causing the electronics to overheat and protect themselves | Replace cooling fan. Clear vent obstructions | not listed | $220 to $470 |
| Cookware not detected on a zone | Non ferrous or warped cookware, or a pan detection fault | Verify cookware with a magnet before any repair | not listed | $0 to $350 |
| Oven not heating on bake | Bake element or relay board | Replace element or relay board | not listed | $200 to $450 |
| Touch controls unresponsive | User interface board failure | Replace the touch control assembly | not listed | $300 to $600 |
Costs are national averages for professional repair (parts + labor). See the linked cost guides below for full breakdowns.
Error codes
| Code | What it means |
|---|---|
| F2 | Oven over temperature |
| F3 | Oven sensor circuit open |
| F7 | Stuck key on the control |
| F9 | Door lock fault |
| U codes | Induction cooktop protection events, overheat, over voltage or pan detection |
Tech notes
The first thing to check on any induction "zone not working" call is the cookware, with a magnet, before anything is opened. A pan that does not hold a magnet cannot be heated by induction, and a genuinely surprising number of these calls end with a cookware conversation and no repair at all.
Cost guides for this machine’s common repairs
DIY step by step instructions for this model
Find a oven & range repair pro near you.
Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.
We'll buy your GE Profile PHS930YPFS, or haul it away.
If the repair costs more than this machine is worth to you, we'll quote you on taking it. Cash offer if it still has value, free or paid scrap pickup if it doesn't. We'll tell you honestly which it is.