Arizona Appliance Repairs Call (520) 412-6871
Menu
Call (520) 412-6871

Washer Leaking Water costs $80 to $350 for a pro repair in Arizona, parts and labor included.

At a glance
  • Parts $10 to $140, labor $80 to $250, about 30 minutes, 2 hours on site.
  • Priciest fix is the outer tub seal / tub gasket, up to $450.
  • 3 of 5 common causes are DIY friendly. Difficulty is moderate.
  • Depends entirely on the source.
Average professional repair
$80 to $350
Parts$10 to $140
Labor$80 to $250
Time30 minutes, 2 hours
DIY difficultyModerate

Averages for independent repair companies. The service call fee of $75 to $150 is usually applied toward the repair. Costs vary by brand, model, and city.

What causes it, and what each fix costs

Fill or drain hoses

$20 to $150

Cracked rubber fill hoses are also the #1 cause of home flood claims. Replace rubber with braided stainless every 5 to 7 years.

✓ DIY friendly

Door boot (front loaders)

$200 to $350

See the door seal guide, leaks at the front glass.

✓ DIY friendly

Drain pump or pump housing crack

$130 to $300

Leaks only while draining.

✓ DIY friendly

Tub to pump hose or dispenser hose

$100 to $220

Internal hoses chafe and split. Cheap part, moderate teardown.

🔧 Best left to a pro

Outer tub seal / tub gasket

$250 to $450

The expensive one, often paired with bearing work since the teardown is the same.

🔧 Best left to a pro

Repair or replace?

Depends entirely on the source. Hoses and pumps. Repair without thinking. Outer tub seal on an old front loader. Price it against replacement like a bearing job.

♻️ DECIDED NOT TO FIX IT?

We'll quote you on hauling it away, or buying it.

Not every washer is worth repairing, and we'd rather tell you that than sell you a repair. If you're replacing it, we'll give you a free quote either way. Scrap pickup for a machine that's finished, or a cash offer if it still has life in it. Working units, recent models and premium brands are often worth real money.

Get a Free Quote Free · No obligation · Arizona only

Quick Questions

Why does my washer only leak sometimes?

Overloads flex the tub and splash past seals, and oversudsing (too much HE detergent) pushes foam out the dispenser and vent. Try a no load hot cycle with a cup of white vinegar and correct dosing first.

Model specific guides for this problem

DON’T WANT TO DIY IT?

Find a washer repair pro near you.

Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.

More washer repair guides