Washer Not Filling, Water Inlet Valve Cost
The washer starts but fills slowly or not at all, only fills hot or only cold, or keeps filling past the right level (valve stuck open, turn off the taps!).
Washer Not Filling costs $120 to $230 for a pro repair in Arizona, parts and labor included.
- Parts $20 to $70, labor $100 to $180, about 30 to 60 minutes on site.
- Priciest fix is the failed inlet valve solenoid, up to $230.
- 3 of 3 common causes are DIY friendly. Difficulty is easy.
- Repair, always, this is among the cheapest washer fixes.
Averages for independent repair companies. The service call fee of $75 to $150 is usually applied toward the repair. Costs vary by brand, model, and city.
What causes it, and what each fix costs
Clogged inlet screens
Sediment from the supply lines packs the small screens where the hoses connect. Cleaning them is free and fixes many slow fill complaints.
Failed inlet valve solenoid
One or both solenoids die and that side stops flowing. A stuck open valve overfills or drips into the tub overnight.
Water pressure / supply problem
Kinked fill hoses or half closed taps mimic a bad valve. Check first.
Repair or replace?
Repair, always, this is among the cheapest washer fixes.
We'll quote you on hauling it away, or buying it.
Not every washer is worth repairing, and we'd rather tell you that than sell you a repair. If you're replacing it, we'll give you a free quote either way. Scrap pickup for a machine that's finished, or a cash offer if it still has life in it. Working units, recent models and premium brands are often worth real money.
Quick Questions
Why does my washer fill when it’s off?
A stuck open inlet valve. Shut the supply taps and replace the valve, water past the valve with the machine off can overflow the tub.
Model specific guides for this problem
Find a washer repair pro near you.
Browse independent appliance repair companies by city, ratings, hours, and phone numbers, no middleman.